Skadis T-Nut Stanley Fatmax Stubby Screwdriver Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Basic holder for Stanley Fatmax Stubby screwdriver FMHT0-62688 using T-nut mount system.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 43
- Wydruki
- 0
- Wyświetlenia
- 220
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
Basic holder for Stanley Fatmax Stubby screwdriver FMHT0-62688.
Its an easy slip fit from the front, the rubbery overmoulding on the screwdriver provides a bit of resistance. Good for stationary application, probably wouldn't trust it if I were transporting the Skadis though, could work loose.
Prints in provided orientation, install upside down as shown on photo.
Designed for M3 screw, with 7mm counterbore for screw head. I used these M3 printed thread T-Nuts: Skadis T-nut mounting system, threaded for M3 or UNC #5-40 screws By ORM
You should also be able use the M2/M2.5 T-Nuts from here: Skadis T-Nuts Mounting System for Ikea Skadis Pegboards by 6d6178
You might want to use a suitable washer in that case.