1 / 8
LiFePO4 battery terminal 10mm socket wrench (non conductive!) — zdjęcie 1
1 / 8

LiFePO4 battery terminal 10mm socket wrench (non conductive!)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

10mm socket Wrench for LiFePO4 battery terminals. Non conductive and hand grip torque design to prevent over tightening!

Ocena
0 / 5
Polubienia
1
Pobrania
5
Wydruki
0
Wyświetlenia
37
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

10mm socket Wrench for LiFePO4 battery terminals. Non conductive and small hand grip design to prevent over torque / over tightening of the 10mm bolts. Safer than using a metal 10mm wrench, which may accidentally make contact with other conductive surfaces. Small, light weight, easy visibility (if printed in a high visibility color). 

Internally Chamfered the socket wrench opening to work around minor print tolerances.

Used on Valance U1-12RT LiFePO4 batteries and PowerSonic PSL-12450 LiFePO4 Battery terminals.

Two models: Short wrench and Long wrench for slightly greater reach.

Print settings: PETG (orange preferred), 5 bottom layers, 5 top layers, 4 perimeter walls, 0.28mm layer height. You can use PLA as well.

Tagi