LiFePO4 battery terminal 10mm socket wrench (non conductive!)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
10mm socket Wrench for LiFePO4 battery terminals. Non conductive and hand grip torque design to prevent over tightening!
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 5
- Makes
- 0
- Views
- 37
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
10mm socket Wrench for LiFePO4 battery terminals. Non conductive and small hand grip design to prevent over torque / over tightening of the 10mm bolts. Safer than using a metal 10mm wrench, which may accidentally make contact with other conductive surfaces. Small, light weight, easy visibility (if printed in a high visibility color).
Internally Chamfered the socket wrench opening to work around minor print tolerances.
Used on Valance U1-12RT LiFePO4 batteries and PowerSonic PSL-12450 LiFePO4 Battery terminals.
Two models: Short wrench and Long wrench for slightly greater reach.
Print settings: PETG (orange preferred), 5 bottom layers, 5 top layers, 4 perimeter walls, 0.28mm layer height. You can use PLA as well.