Voron 350 Insulating Side, Back and Top Panels, in GridLink Genesis (GLH6020-050)

This model extends the GridLink Genesis™ system with edge parts sized to allow matching the Voron 2.4, 350mm panel mounting specification. I ran out of filament about 2mm from complete on my last batch, so 4 of the pieces shown in the photo are showing their jigsaw connection. That's a print error, not a model error!  :-)

For a Voron 2.4, 350mm, side panels are 483w x 503h. The top panel is 483w x 483d. GridLink Genesis uses a 60mm base square. So, edge parts here have a 3mm thick mounting edge and are width-adjusted to create the exact 483 and 503mm size needed.

“Easy Mode” options here include a 2x2 (120mm square) panel part as the easiest option for filling the interior. You can print 9 of those as listed. But please be aware that the entire interior for each Voron panel type, simply needs to be any 360mm x 360mm GridLink Genesis build. You could print 36 @ 1x1 squares, or 4 @ 3x3 squares, or various rectangles, etc. You could make a pretty convincing Creeper face if you include the edge pieces, which makes this a (nominally) 8x8 square grid. 

The full list of compatible and similarly styled parts (along with more info on using them) is https://www.printables.com/model/1386907. And there is also a large and growing list of GridLink panel and wall art models at: All GridLink Sizes, Options and Tools

Also shown in the cover photo, is the Printsulation Top Hat for 3D Printer Chambers, which was sort-of an early version of GridLink. 
 

PANELS FOR OTHER PRINTERS:

Voron 2.4, 250, 300mm, Trident and Doom Cube users: I intend to make the other sizes soon. I'll prioritize the needs of those who write and tell me what their build is. I believe the standard VORON 2.4, 350mm panel here will invert into the extra insulation space of a Doom Cube. Write me if you want to try this, and I'll publish a version without the inside screw holes, which would be on the outside in that case.
 

PARTS FOR EACH PANEL:

The first few folders of parts are the easy button… If you just want that type of panel and are OK with a 3x3 grid of tiles surrounded by an edge, just pick the folder for the panel you want and print.

If you want to take more control, look at the folders further down. There are edges in everything from 1x1 through 5x5 (plus the extra width to meet Voron specs). And at the main listing for this style, you will find every core (non-edge) part from 1x1 to 5x5 as well.
 

FIT AND PANEL CURVATURE:

These fit great but tend to have an easily corrected curve. You should add the usual 3mm (or a thicker 5mm) edge seal as you would with acrylic. But you may also need to place a firm fastener in the middle of the edge. It takes fairly little force to straighten these, but some panel mounts do have very little clamping force.
 

IS IT STRONG ENOUGH:

Side panels tend to be. For a top panel, you might want to use the channels that are cut for adding 4mm steel rod. (5/32" TIG welding rod is actually 4mm and may be less expensive depending on the day.)

There is room for a lot of rods… You really don't need that many for a normal setup. But this gets into safety issues that you need to analyze for yourself. Don't use this where someone might put something heavy on it and push plastic down into a heater, etc. Make sure you evaluate the long-term safety of what you build. 
 

BOM: 

• Filament:
  • ABS (Most insulating): https://amzn.to/3X3hUVO 
  • Polycarbonate (not for beginners!): https://amzn.to/46nxLDK 
  • PA6-CF (Just for funzies!): https://amzn.to/3V1H7yM 
     
• Adhesive Foam Seal:
  • 6.25mm x 6.25mm Neoprene (150C max): https://amzn.to/461NNTQ 
     
• (optional):
  • Dead Blow Hammer: https://amzn.to/3R7addX 
  • Printable tile removal tools: https://www.printables.com/model/1323416 
  • Magigoo: https://amzn.to/43yrB2r 
  • Elmer's Giant Purple Glue Sticks: https://amzn.to/3ZmCe5P 

‘Likes’, ‘Follows’ and ‘Downloads’ all help to elevate goods designs, like any other social media. If you like a thing, please click ‘like’.

REVISIONS: 
   2025-09-04: Initial Release
   2025-10-10: Minor description / instruction tweaks.