Nema 17 Dual Extruder Mount and Support Bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Side-by-side dual extruder mount that fits on an Ender-5, or anything with 2020 or 2040 and 42-40 extruder steppers. I…
- Ocena
- 5 / 5
- Polubienia
- 16
- Pobrania
- 122
- Wydruki
- 1
- Wyświetlenia
- 544
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Side-by-side dual extruder mount that fits on an Ender-5, or anything with 2020 or 2040 and 42-40 extruder steppers. I took the geometry from VincentM's damper as a starting point.
I printed just the mounting plate first, then realized that it really wasn't as sturdy as I had wanted since its PLA vs Aluminum. I added the rear support clip, which ties the backs of the motors together and stiffens up the whole assembly. M4 bolts and t-nuts to mount to the frame.
Simple and easy - enjoy!
Category: 3D Printer Extruders