Beelink EQi12 to VESA 100mm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I wanted a way to mount the Beelink EQi12 to the back of the monitor for my CNC Plasma Table
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 184
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I am in the process of building a new control cabinet and stand for my CNC plasma table, I am using a Viewsonic ViewSonic TD2211 Resistive Touch Screen Monitor, with a Beelink EQi12 for the CNCPC.
I wanted a way to mount the the little PC to the back of the monitor, and like most 3d printer users I started searching out STL files. I found two files I like, the Beelink mount by @georgmierau an a 100mmx100mm Vesa extension/offset plate. the problem was I needed one side to be 75mm x 75mm for the Beelink mount
So I spent some time drawing a new VESA 75mm to 100mm adaptor plate using the VESA extension plate inspired by @gwalker_1483894 design located at https://www.printables.com/model/660428-100mm-vesa-extensionoffset
The VESA Extension plate mounts to the monitor with four M4x16 flat head screws
The 75mmx75mm side is designed to take M3x6 heat inserts, the Beelink EQi12 mount then mounts to the adaptor plate with four m6x6 flat head screws
Beelink EQi12 75mm Mount by @georgmierau can be found at the below link
https://www.printables.com/model/1155884-custom-vesa-75-mount-for-a-beelink-eqi12
