Bar-end bicycle bell fixing
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A better fixing for an Ali-express bar end bike bell
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 117
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
The YouTube channel “Everything's Been Done” reviewed a bunch of AliExpress cycling products that are actually worth buying, Amongst these was this really neat bar-end bike bell, and seeing as I needed a new bell, I bought one.
It was really good, except the wedge to fix it in worked about 30mm inside the handlebar, so I couldn't get it tight enough to prevent the bell from moving, or if I did, it muffled the sound.
Having a 3D printer though, this wasn't a problem, and I printed a retaining wedge that works parallel along its whole length rather than just at the end. You'll need an M5 threaded insert to make this work, and I printed in PLA, with three walls for a bit of strength.