Cover Shroud for X-Shot BCAR
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Zuru X-Shot logoed cover/shroud for the standard BCAR that comes with the Piston Pump.
- Ocena
- 5 / 5
- Polubienia
- 23
- Pobrania
- 66
- Wydruki
- 2
- Wyświetlenia
- 421
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This is a shroud cover that fits over the BCAR that comes with the Xshot Motorized Piston Pump blaster. It has very slight channels inside that will grip on your BCAR. The nature of the Xshot BCAR has all the moving parts contained within the overall diameter and outer body dimensions of the BCAR housing. Depending on your print tolerances, you can add some tape to the top and bottom of the BCAR to adjust how tight you want it.
IMPORTANT: There is a specific seam cut into the bottom (when oriented for actual usage) of the shroud. This seam is for you to hard set your printer to this seam and it will generate the best print results because layer changes and seams will be inside or at the cut that runs vertically along the print (when on the bed). Please note that if your printer is set to “Sharpest Corner” to just check that it's actually finding that cut. I printed mine at 0.12 layer height but you could do it at 0.2.
File is oriented for printing and I would add a skirt.
Setting no derivatives or commercial because I do not own the logo and branding. This is just for users to add some OEM styling to their blaster.