IKEA Galant Desk Leg Accessory Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modular accessory mount for the IKEA Galant (and other) desks with vertical tubular legs.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 79
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Share Alike
Clamp-on “cuff” for mounting accessories, including computer CPU enclosure, utility shelves, Multigrid panels, or other items, to the vertical tubular legs of the IKEA “Galant” desk, and possibly other similar desks/tables with cylindrical legs. Has an optional anchor for providing vertical support using the M8 threaded hole found near the top of some models of legs.
Although I have not tested it to failure, I would expect it to be able to hold 25kg / 50lbs when printed from PETG and clamped securely onto the leg, and perhaps 50kg / 100lbs if the optional tensile anchor is used. Due to the tendency of PLA to “relax” (sometimes called ‘creep’) under stress, printing from ABS or PETG is recommended. However, PLA will probably work if you do not overtighten the bolts, use the tensile anchor for extra support, and don't overload it.
Hardware Required
- 4x M4x20mm (min.) machine screws and matching hex nuts
- 4x M3x4mm (medium length) heat-set inserts (Adafruit P/N 4255)
- 2x M3x14mm countersunk machine screws (McMaster P/N 91294A133)
- 2x M3x8mm (max 12mm) countersunk machine screws
- Optional: 1x M8x20mm to attach upper “tensile anchor” to provide support cuff using paracord from existing M8 threaded hole
Print Settings
- Printing in PETG is recommended, at least for the half-round “cuffs” to prevent stress relaxation and loosening of the cuff on the leg over time
- The cuff pieces should be printed upright (same orientation as when in use) while the flat parts should be printed with the largest face on the bed; parts are oriented for printing in the 3MF file
- All files can be printed in one batch if desired, or they can be done in two stages to allow mounting of the first pieces while the second ones are still printing
- 20-25% infill and 4 perimeters on all sides recommended, although you can optimize as desired based on your intended use
Accessory Mounting
When fully assembled, the cuff provides two slip-on mounts for further accessories, one on each side (180 deg. apart) of the desk leg. Each one is designed to be 1" wide, with a 1/8" x 1/8" groove set 1/8" back from the front face.
To aid in integration with your own prints, a STEP file of the “slot plate” (orange on the renderings) is included.