Mini-ITX 10-inch rack 1U shelf
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A 1U rack shelf for a 10-inch rack to house a Mini-ITX motherboard, with template for custom IO shield
- Ocena
- 5 / 5
- Polubienia
- 83
- Pobrania
- 486
- Wydruki
- 2
- Wyświetlenia
- 3853
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
You should print a small part of the model for test fitting
…because I cannot guarantee that my Mini-ITX board is the same as mine, especially in how far out the IO ports protrude from the motherboard itself.
Also, make sure you have enough vertical clearance! I had to really bend the cable of my ATX 24 pin to get everything to fit in 1U.
Assembly
Hardware required: 4 × M3*5 to secure motherboard to shelf unit, 4 × M3*8 or longer to secure IO shield to shelf unit.
- Secure motherboard to shelf unit with 4 × M3*5 bolts; the bolts should cut their own threads into the plastic standoffs of the shelf unit
The IO shield is optional but good to have. Since most Mini-ITX's ship with a > 1U IO shield, you'll likely have to design it yourself.
- Customize io-shield-template.3mf or io-shield-template.FCStd to fit your motherboard's IO
- Before fastening the customized IO shield to the shelf unit, thread the M3*8 or longer bolts into their holes to begin cutting threads into the plastic
- Finish fastening the customized IO shield to the shelf unit
If by some stroke of luck you have the exact same motherboard as I do, you can of course just use the io-shield-n100-nas.3mf. Here's the Taobao (basically, Aliexpress) product page for my motherboard:
