1 / 3
Ender 3 NG v1.2 electronics top shims
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stuff that gap between the electronics tops with a shim
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 46
- Wydruki
- 0
- Wyświetlenia
- 389
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (16)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (35)Powiązane
Got a gap between the “electronics top A” and "electronics top “B” parts on your Ender 3 NG v1.2? Hide your shame with one of these shims!
This is a really common defect on Ender 3 NG v1.2 builds. Here is a gap present between the top parts:

…and here's the same printer with a 1.75 mm shim!

I included shim sizes 0.5 mm up to 4 mm with 0.25 mm steps. Since these parts are thin, it's a good idea to sand your shim flat before installing it.