Comb for Roomba Brush
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A circular comb with angled teeth to remove hair from the bristles of the Roomba brush/bristles
- Ocena
- 5 / 5
- Polubienia
- 15
- Pobrania
- 54
- Wydruki
- 0
- Wyświetlenia
- 322
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial
If you have long hair, you know how frustrating it is to remove it from the bristles of the Roomba brush. Here is an easy print comb to remove stubborn, wrapped-around hair from the bristles of the brush. Just take off the yellow bushing of the brush and put the comb with the flared collar forward and break aligned with a fin of the brush, and pull the brush head through. Repeat it a few times and it should pull the bulk of the hairs and fibers out of the brush. What is left will be strands running the length of the brush, and should be easy to remove.
Judging by the replacement part online, this should fit the 500 and 600 series. Mine is the 600, and is what is pictured.
I printed with a 0.6mm nozzle, at 0.25mm layer height and 100% infill. On the MK4 it took about 45min. Let me know what you think!