Volvo B230 TPS adapter, TPS 850/S70/V70 OEM
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Another TPS using a OEM Volvo 850/S70/V70 TPS sensor, this is the one with the offset pot hole.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 235
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Another model of a TPS adapter to use on a stock B230 throttlebody, my 14 year old bosch style TPS adapter was faulty due to trace or brush being worn inside of it, possibly also a very loose fit on this chinese made low priced unit.
This new adapter is designed from a OEM Volvo v70 TPS sensor I got from a junkyard, works flawlessly now.
This type of TPS sensor can also be seen on the Volvo 854/855/S70/V70 models.
This also features a D-shaped axle hole fitting, so I designed a adapter that did not require any modifications to the throttle blade axle.
So it is thicker, good for plastic strength in this case, while also bringing some quality of life benefits with being thick.
Double sealing with off the shelf O-rings, 1 to seal between Throttle Body/TB and the adapter, and one to seal between Adapter and TPS.
Then we also have those pesky small screw to tighten the adapter to the TB, that can fall off on the stock adapter and my previous adapter. This is now recessed long into the adapter, make it much harder to drop those bolts.
It also places the TPS in a much neater location, both funcionally and aesthetically. The connector is facing down, nothing that comes in the way of the 13mm nut that holds the TB to the intake.
Uploaded multiple pics, and it works as is for me, without issue.