ESP32-S3 - ELRS receiver Сase
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Case fore ESP32-S3-wroom-1 and ELRS receiver
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 380
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
I programmed a device that receives data from the ELRS remote control via the CRSF protocol, processes it and transmits it to the computer. The computer receives input from the remote control as input from a joystick. This can be useful if you want to connect the remote control wirelessly, but your computer does not have bluetooth
The case is designed for the ESP32-S3-wroom-1 and ELRS receiver. Since receivers come in different sizes, the frame for it was not made. It is recommended to glue the receiver and antenna with silicone glue
Printed with PETG filament
ESP32-S3 and the receiver should be connected to the following pins:
ESP32-S3 - Receiver
GND--------GND
3V3----------Vin
4-------------TX
5-------------RX
The project code that needs to be flashed into the Esp32-s3 is on my git page:
https://github.com/Dyusha37/ESP32-S3_ELRS_joystick