Dreamcast BlueRetro Adapter Enclosure
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An enclosure for a Blueretro Bluetooth adapter for the Sega Dreamcast
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 145
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Share Alike
Printed in PETG with default settings
To assemble you'll need:
- An ESP32 module (flashed with the blueretro firmware for external adapters, for the Dreamcast, I flashed it via USB and then I desoldered the module with a hot air station)
- 3mm LED, color of your choice
- AMS1117 linear regulator (sourced from the dev board that has the ESP32 module)
- Resistor for the LED, I used a 280ohm for mine
- A Dreamcast connector, mine is an after market one
- Heat insert for M3 screws (Optional)
- M3 screw, I used a M3x15mm
The schematic I used to assemble the circuit is the next one:
(Credits to https://www.youtube.com/@DAVIDXGAMESmx for the diagram)
How to flash the firmware (process shown at 19:36, credits to https://www.youtube.com/@SquickWorks for the tutorial)
To finish, these are a few pictures to illustrate the assembly process, take in mind that it doesn't need glue for the port as it's preassure fitted and regarding the small lid, I've found that it fits without issues and it stays secured without the need of the brass insert, so you can also leave it as is, preassure fitted or glue it
- Small update: I added a version of the lid without the opening for the M3 screw
