Tiny Mini Micro vertical PC mount. M93p, M715q, etc.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mount for a small PC to be attached to a piece of wood or shelf (tiny mini micro).
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 193
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Mount for a Tiny Mini Micro computer. Has been tested on…
… I may (but cannot guarentee, I'll probably forget) add some more machines as I purchase them (I want one with a i5-7500T). This shouldn't need to be said, but this is for the computer only, i.e. not including the optional external optical drive.
Uses a small 3.5mm countersunk screw (2.5mm drill bit) for each mount (probably also works with 4mm, I made the holes slightly oversized). Suggest using 2 per computer. Wood thinkness is dependant upon the length of the screw (or vise versa)! Mine is a piece of 20mm scrap MDF from my local hacspace.
Suggested settings…
- 0.2mm layer height,
- Prints on it's side (as file is orientated) for better strength,
- No supports,
- No raft,
- 3 walls,
- 3 tops,
- 3 bottoms,
- 20% cubic infill,
- I printed in eSun grey PLA+ and seems fine so far (the i5 & Ryzen varients run a bit warmer than the i3),
- Printed mine on a Creality Ender 3, but should work on basically anything (may not be square if printed on a Delta, lol).