Tiny Mini Micro vertical PC mount. M93p, M715q, etc.
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mount for a small PC to be attached to a piece of wood or shelf (tiny mini micro).
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 26
- Makes
- 0
- Views
- 193
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Mount for a Tiny Mini Micro computer. Has been tested on…
… I may (but cannot guarentee, I'll probably forget) add some more machines as I purchase them (I want one with a i5-7500T). This shouldn't need to be said, but this is for the computer only, i.e. not including the optional external optical drive.
Uses a small 3.5mm countersunk screw (2.5mm drill bit) for each mount (probably also works with 4mm, I made the holes slightly oversized). Suggest using 2 per computer. Wood thinkness is dependant upon the length of the screw (or vise versa)! Mine is a piece of 20mm scrap MDF from my local hacspace.
Suggested settings…
- 0.2mm layer height,
- Prints on it's side (as file is orientated) for better strength,
- No supports,
- No raft,
- 3 walls,
- 3 tops,
- 3 bottoms,
- 20% cubic infill,
- I printed in eSun grey PLA+ and seems fine so far (the i5 & Ryzen varients run a bit warmer than the i3),
- Printed mine on a Creality Ender 3, but should work on basically anything (may not be square if printed on a Delta, lol).