Strong Rounded Corner Bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Corner bracket to make 90 degrees connection of three panels easier and stronger. For 3-4mm screws. Printable as pyramid
- Ocena
- 5 / 5
- Polubienia
- 835
- Pobrania
- 1944
- Wydruki
- 7
- Wyświetlenia
- 5788
- Oceny
- 7
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I recommend printing from ASA but PETG will also work. 0.2mm layer height. 4 or more perimeters will make it stronger. I also included a variant for printing laying on the arms (as a pyramid) so that the orientation of the layers makes it even stronger.
Dimensions:
- 3mm thick version 54 x 54 x 54mm
- 4mm thick version 55 x 55 x 55mm
- 5mm thick version 56 x 56 x 56mm
Wholes prepared for countersunk screws of 3 to 4 mm diameter.
UPDATE: added variant of 5mm version placed on the pad as pyramid for symmetrical orientation of the layers to make it even stronger - must print with brim