Toggle Switch Frame For Mazda Mx-5 Miata Pre-Facelift NA 1989-1993 main panel
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Toggle Switch Frame, which is a perfect bolt-on mod for your Miata.
- Ocena
- 0 / 5
- Polubienia
- 1
- Wydruki
- 0
- Wyświetlenia
- 94
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Standard Digital File License
A Toggle Switch Frame, which is a perfect bolt-on mod for your Miata.
The holes are 12.5mm in diameter, and the mount walls have a 15.8mm gap to fit M12 toggle switches. Therefore, there is zero wiggle room for the switches, and the overall structure with reinforcement makes the frame rigid and racetrack-like.
Height is 68mm.
For it, I use to control my underglow, gauges and more quirks that I've added.
30% gyroid infill, do print the face on the bed, cuz textured PEI or any other 3D effect plate does make it look cool. There is not much playroom on the settings, it needs support tho.
I've used PLA+ and it holds just fine for me.