Fidget Spinner
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
It spins! It might help relieves stress! That's about it. Have fun! 3/31/17 update: I changed the edge from a…
- Ocena
- 4,929 / 5
- Polubienia
- 120
- Pobrania
- 998
- Wydruki
- 17
- Wyświetlenia
- 7289
- Oceny
- 14
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial
It spins! It might help relieves stress! That's about it. Have fun!
3/31/17 update: I changed the edge from a semicircle to a rounded rectangle (fillet radius 3.5mm -> 2mm) to make the print a little cleaner and better looking when printed.
the cap press fits into the center of the bearings and should ride above the bearing by 1mm, keeping it clean and providing a good grip. It's available with and without a divot.
I would suggest using either a wall thickness of at least 1.2mm or a 100% infill. The solid infill makes it a bit heavier but it doesn't break like the old ones with less infill.
Swapping the filament color mid print looks great, see the photo I've included!
Edit 4/30/17: I've uploaded my new designs for the spinner caps. One is flat, one is concave, and one has concentric rings.
Print Settings
Printer:
Maker Select v2.1
Rafts:
No
Supports:
No
Resolution:
.2 or less
Infill:
100 recommended
Category: Mechanical Toys