Fidget Spinner
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
It spins! It might help relieves stress! That's about it. Have fun! 3/31/17 update: I changed the edge from a…
- Rating
- 4.929 / 5
- Likes
- 120
- Downloads
- 998
- Makes
- 17
- Views
- 7,289
- Reviews
- 14
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial
It spins! It might help relieves stress! That's about it. Have fun!
3/31/17 update: I changed the edge from a semicircle to a rounded rectangle (fillet radius 3.5mm -> 2mm) to make the print a little cleaner and better looking when printed.
the cap press fits into the center of the bearings and should ride above the bearing by 1mm, keeping it clean and providing a good grip. It's available with and without a divot.
I would suggest using either a wall thickness of at least 1.2mm or a 100% infill. The solid infill makes it a bit heavier but it doesn't break like the old ones with less infill.
Swapping the filament color mid print looks great, see the photo I've included!
Edit 4/30/17: I've uploaded my new designs for the spinner caps. One is flat, one is concave, and one has concentric rings.
Print Settings
Printer:
Maker Select v2.1
Rafts:
No
Supports:
No
Resolution:
.2 or less
Infill:
100 recommended
Category: Mechanical Toys