Herman Miller Logitech Embody caster wheel stopper / lock / chock
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wheel stoppers for the casters that come with the specific colorway of Logitech embody instead of the standard ones.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 303
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Stoppers for the particular caster wheels that come with this specific black/white colorway of the Herman Miller Logitech Embody chair. For whatever reason it uses these 2.5 inch casters instead of the more common ones (see comparison photo, which I didn't take).
Designed in FreeCAD and MSPaint in <1 hour, measured with cheap plastic calipers, came out good enough first try, didn't make any revisions so far.
Printed with PLA (some kind of shimmer blueish black) 30% gyroid infill at about 1.5hrs on a Creality K1 w/ basically everything stock, default standard quality slicer settings otherwise. I weigh <160lbs so it works fine for me, your results may vary.
Used for a table clamp racing wheel setup. Logitech G920 and matching shifter and pedals. Even with a smooth bottom layer they don't move on my hardwood floor.