1 / 4
Buddy3D Magnetic Holder for Prusa MK4/S Enclosure — zdjęcie 1
1 / 4

Buddy3D Magnetic Holder for Prusa MK4/S Enclosure

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Simple, but flexible and movable solution to put your Buddy3D camera into your Prusa Enclosure using magnets.

Ocena
0 / 5
Polubienia
2
Pobrania
22
Wydruki
0
Wyświetlenia
124
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Share Alike

This is a camera holder for the Buddy3D to be mounted somewhere into your Prusa Enclosure (or other enclosures as well). Two magnets hold the mound on metallic parts (steel) or on glass with magnets also on the other side.
You can mount it upside down or downside up, on the side struts of the enclosure or on the lid facing down.
The USB cable is supposed to be side mounted.

For printing you must put supports to the two flaps protruding from the sides of the mount. Simply put a 0.4 support  marker to the lower edge of each flap and let the slicer generate organic supports. Usually no other supports are needed.. The step file contains additional structures to print the part in 45° angle.

After printing the part, put two magnets into the back of it and set it to its place in the enclosure.

I used Prusament Galaxy Black ASA filament.

The compartment for the magnets are designed of 40x10x5 mm magnets. These magnets and the sturdy design of the part will ensure a secure hold.

Tagi