Buddy3D Magnetic Holder for Prusa MK4/S Enclosure
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple, but flexible and movable solution to put your Buddy3D camera into your Prusa Enclosure using magnets.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 22
- Makes
- 0
- Views
- 124
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Share Alike
This is a camera holder for the Buddy3D to be mounted somewhere into your Prusa Enclosure (or other enclosures as well). Two magnets hold the mound on metallic parts (steel) or on glass with magnets also on the other side.
You can mount it upside down or downside up, on the side struts of the enclosure or on the lid facing down.
The USB cable is supposed to be side mounted.
For printing you must put supports to the two flaps protruding from the sides of the mount. Simply put a 0.4 support marker to the lower edge of each flap and let the slicer generate organic supports. Usually no other supports are needed.. The step file contains additional structures to print the part in 45° angle.
After printing the part, put two magnets into the back of it and set it to its place in the enclosure.
I used Prusament Galaxy Black ASA filament.
The compartment for the magnets are designed of 40x10x5 mm magnets. These magnets and the sturdy design of the part will ensure a secure hold.