Tiny Whoop Canopy Camera Buzzer Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tiny Whoop Build UpSTL Objects:CanopyCamera MountBuzzer HolderE010 Camera MountCanopy is very thin so removing support…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 134
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
Tiny Whoop Build Up
STL Objects: Canopy Camera Mount Buzzer Holder E010 Camera Mount
Canopy is very thin so removing support is a precise work. I was successful right after print. Some parts of objects are bend after print with a help of a hot gun.
Used additional materials were: zip ties, shrinking tubes, connectors and 2,5mm Dia. plastic from ear sticks...
Beside all STL uploaded objects there are also many pictures so I guess there is no need to lose any more words....
How I Designed This
Beecore TinyWhoop with Camera Mount and Buzzer Holder
E010 With Camera Mount and modified power connector
Category: R/C Vehicles