150mm to 125mm Ventilation Hose Adapter – Universal Use (Growbox, Dust Extraction, etc.)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a practical hose adapter that reduces a 150 mm connection down to 125 mm.
- Ocena
- 0 / 5
- Polubienia
- 19
- Pobrania
- 90
- Wydruki
- 0
- Wyświetlenia
- 342
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a practical hose adapter that reduces a 150 mm connection down to 125 mm.
I originally designed it for my growbox setup, but it works just as well for any ventilation, dust extraction, or air circulation project where you need to connect different hose sizes.
The adapter is designed for a stable fit and smooth airflow. It prints easily without supports, and the wall thickness provides a good balance between strength and material use.
There is also a short version available, but I haven’t tested it yet.
The normal version took about 5 hours to print in ASA with a 0.6 mm nozzle and 25% infill.
And yes my K1 has some Problems i noticed it after my Print :D
Update:
My active coal filter was a bit bigger then 150mm, so i designed a Adapter (printed in TPU). I add that Model here aswell :)
If you find it useful, I’d love to hear your feedback!
PS: After uploading, Printables showed me similar Models, but this and the short Version were all designed by myself, i didnt knew they existed before lol. Also its really not that Hard to make 2 circles and connect them with fusion :D