1 / 4
Death Star Clock - REMIX
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Wall-mounted
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Mix and match of different parts from the following links to create a new clock combo. Up to four colours for each plate
- Print larger pieces at 0.20mm or 0.22mm layer height
- Smaller pieces at 0.14mm to 0.16mm
- Printed using hardened steel 0.4mm nozzle on Kobra S1 combo
- Organic tree supports with a Z-top distance 0.275mm just come off like butter
- Slow first 2 or 3 layers for dainty pieces to 30mms for good adherence
- Ironing - rectiliner 10%
The second hand will need to be trimmed to your liking with side cutters.
All 3 hands needs a bit of work in the centre holes. This was intentional as I didnt want them fitting too loose