1 / 4
Death Star Clock - REMIX
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Wall-mounted
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Mix and match of different parts from the following links to create a new clock combo. Up to four colours for each plate
- Print larger pieces at 0.20mm or 0.22mm layer height
- Smaller pieces at 0.14mm to 0.16mm
- Printed using hardened steel 0.4mm nozzle on Kobra S1 combo
- Organic tree supports with a Z-top distance 0.275mm just come off like butter
- Slow first 2 or 3 layers for dainty pieces to 30mms for good adherence
- Ironing - rectiliner 10%
The second hand will need to be trimmed to your liking with side cutters.
All 3 hands needs a bit of work in the centre holes. This was intentional as I didnt want them fitting too loose