1 / 2
Twelve Sided Orchid/Plant Pot with Drip Tray — zdjęcie 1
1 / 2

Twelve Sided Orchid/Plant Pot with Drip Tray

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Pot for orchid or general plant pot with a tight fitting drip tray

Ocena
5 / 5
Polubienia
6
Pobrania
32
Wydruki
1
Wyświetlenia
142
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Home Decor
Licencja
Creative Commons — Attribution — Noncommercial

 I needed to repot my long suffering orchid, as it's health was deteriorating due to being in rubbish media. I'm not sure if they really need a transparent pot but the roots are green and I have transparent filament so why not?

 I created this planter/pot for it specifically to be printed in a clear PETG, so infill was not wanted as it would look bad. Therefore the pot has a thickness of 1.6mm to avoid any infill, being only thick enough for a double 0.8mm wall. 1.6mm of PETG is surprisingly strong and retains a bit of flex so is unlikely to get cracked. It turned out so well that I printed off a few more in various PETG filaments!  125mmH x 140mmW

Tagi