Lenovo SFF 3.5" alternative drive tray
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Lenovo has a common SFF chassis that covers many models. This tray allows 2x 3.5 HDDs to be squeezed in.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 62
- Wydruki
- 0
- Wyświetlenia
- 458
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
Lenovo has a common SFF chassis that covers many models of thinkcentre (e.g. M710s, M720s, M900s, M910s, M920s ) ideacentre and other value ranges such as V-series like V530 and they only change the front panel/bezel according the model range.
However for people wanting to homelab with them, the internal mountings for HDDs is quite disappointing. While the HP and Dell equivalent SFF cases have specific bays and trays for 2x 3.5" HDDs, these Lenovo ones do not, despite there being enough room (JUST!) to have 2 at the front.
Some versions of this chassis hard mounts the HDD in place with screws, rather than a tool-less bracket in other versions.
One part of the problem is the default mounting holes put the HDD too far inboard into the case to allow another to be mounted at all. The second is usually a mounting bracket for an ODD and a 2.5" SSD/HDD.
This tray re-creates a tool-less bracket that allows 2x 3.5 HDDs to be squeezed in by moving it closer to the wall of the case. (It could be moved a further 5mm out if one does not care about not fouling a latching mechanism that's probably a bit un-necessary)
2x drives will then just fit if they are mounted with connectors together in the middle and low-profile SATA data and power connectors are used