Simple Hotwheels Shelf for Skadis board
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A basic shelf for holding Hotwheels/Matchbox cars on a skadis board.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 145
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution — Noncommercial
With me having so many Hotwheels cars, both regular and custom, I wanted to create some kind of display for them. So, here it is: a basic shelf that clips on an IKEA Skadis board.
Included are 4 files: the base of the shelf, the hooks, wheel stops, and a blank nameplate.
The shelf can easily be printed, but as I wanted a bit of a nicer surface, I cut it out of some MDF (if you also want to make it yourself, a technical drawing with all the measurements is included).
The hooks are simply glued to the bottom of the base. I recommend using hot glue, but really any decent glue will work.
The wheel stops prevent the car from moving from side to side and back and forth and should thus hold the car even the base is not perfectly level.
As for the nameplate, you can either add some letters, and a logo in a CAD program (I did this in Tinkercad), or simply paint them on. Or just leave it completely off. Up to you.
All models have been tested on an Ender 5 Pro (0.2mm, 40% infill, PLA).
PS: If you are looking for the pictured car, here it is:
https://www.printables.com/model/1422443-hvy-nightshark-hotwheels-model