1 / 6
Cube and ball fidget spinner keychain - Print in place — zdjęcie 1
1 / 6

Cube and ball fidget spinner keychain - Print in place

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Print in place "cube and ball" fidget spinner keychain Dimensions of approximately 28 mm x 41 mm

Ocena
0 / 5
Polubienia
5
Pobrania
60
Wydruki
0
Wyświetlenia
223
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Gadgets
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This cubic keyring and ball spinner is printed in place with supports. 

The ball rotates freely in the cube with a tolerance of 0.4 mm.

If you look at the print file provided, you will see that I printed the cube with a 50% infill and the ball with a 25% infill. This setting is not mandatory; you can choose to print the whole thing with the same infill. 

As for the supports, I did not choose the “supports everywhere” option, but used the “supports only for support generators” option so as not to put them in inaccessible areas.

Dimensions of approximately 28 mm x 41 mm

Tagi