1 / 6
Cube and ball fidget spinner keychain - Print in place — image 1
1 / 6

Cube and ball fidget spinner keychain - Print in place

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Print in place "cube and ball" fidget spinner keychain Dimensions of approximately 28 mm x 41 mm

Rating
0 / 5
Likes
5
Downloads
61
Makes
0
Views
225
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

This cubic keyring and ball spinner is printed in place with supports. 

The ball rotates freely in the cube with a tolerance of 0.4 mm.

If you look at the print file provided, you will see that I printed the cube with a 50% infill and the ball with a 25% infill. This setting is not mandatory; you can choose to print the whole thing with the same infill. 

As for the supports, I did not choose the “supports everywhere” option, but used the “supports only for support generators” option so as not to put them in inaccessible areas.

Dimensions of approximately 28 mm x 41 mm

Tags