Pwnagotchi Slim (Slimagotchi) + waveshare + ups lite
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remixed to allow using the original ups lite spacers and screws
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 76
- Wydruki
- 0
- Wyświetlenia
- 536
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial
Original model requires shorter spacers for the ups lite battery pack.
In my pwnagotchi I am unable to install the shorter spacers as it causes the pi board to press on the battery and is very dangerous. There is heat etc. and the battery needs some free space (see galaxy note 7 fiasco).
I remixed it to add grooves on the wall to allow the screw heads to slide instead of squeezing the battery, so it fits in the same external dimensions.
Also scaled it a bit to fit the entire pwnagotchi slim well.
Tested hardware: Raspberry pi zero 2 w + Waveshare 2.13 V2 + UPS Lite 1.2
Update: Added a small groove for camera connector which was really tight in the previous version