Circular Passthrough for Wires
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A 25mm circular passthrough with a 10x6mm rectangular hole to allow wires to pass through a 3mm thick Voron panel
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 97
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Building a 250mm Trident sidepack has been a labour of love, as I was unable to find parts that work. This is a simple cable passthrough that allows three (in my case) Z-servo motor cables (with braided cover) to pass through the 3mm deck using a 25mm hole (cut with a standard 25mm electrician's hole saw) from my printer base into the electronics bay.
As well as the 10x6mm STL's and STEP files, I have also included the STEP file for a master 25mm blank so you can customise your own.