Qidi Plus 4 Bed locking thumb nut
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
locking bed thumb nuts using Nyloc or Aerotight Self Locking Nut
- Ocena
- 5 / 5
- Polubienia
- 15
- Pobrania
- 30
- Wydruki
- 1
- Wyświetlenia
- 398
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Base for this project was model on https://odysee.com/@The_Mi3_Channel:f/Q1-Pro-Locking-Thumbwheels:4
Made it from scratch following all major dimensions from Qidi Plus 4 original nuts . For now i have Nyloc nuts (which are great and hold bed in place) inside but I'm waiting for Aerotight Self Locking Nuts which should be delivered within few days. These are full metal and should be better than nylon filled ones.
There are three files of bottoms original, strong and end cap for spanner ( it should work with spanners for stock bed nuts )
For set of 4 you need :
12 x m3 x ( 5-8mm long) screws (for reference https://www.aliexpress.com/item/1005005070119421.html)
4 x m4 Nyloc nuts ( or Aerotight Self Locking Nuts)
4 x brass tube OD 5mm - wall thickness mas 0.45mm - length 9.4mm
Apart that you will need m3 thread tap to make threads in top wheel
There is thin washer along with the models which helps with installation as it gives you rough level from where is easy to finish leveling by [screws_tilt_adjust] or other. Simply screw nuts till after adding washer on the bottom you'll find bed screw on the same level as bottom of the washer.
It needs to be printed with at least ABS, ASA as it operates in heated chamber.
Printed with Creality PPA CF
nozzle 0.4
layer 0.12
top wheel needs supports for nut hole
thank you