1 / 1
Azteeg X3 adapter for RAMPS mounting holes — zdjęcie 1

Azteeg X3 adapter for RAMPS mounting holes

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

In case you have RAMPS mounting holes on a frame but want to mount an Azteeg X3 board in its place instead. Use this…

Ocena
0 / 5
Polubienia
1
Pobrania
6
Wydruki
0
Wyświetlenia
97
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Share Alike

In case you have RAMPS mounting holes on a frame but want to mount an Azteeg X3 board in its place instead. Use this and you're set.

Instructions

Print. Mount plastic part using RAMPS holes. Mount Azteeg X3 board. Done.

I made this after seeing the "Sanguinololu adapter for RAMPS mounting holes" by Sound: http://www.thingiverse.com/thing:39893.

NOTE: The Azteeg X3 board hole spacing was obtained from http://files.panucatt.com/datasheets/x3_wiring_diagram.pdf

Category: 3D Printer Accessories

Tagi