1 / 8
Clamps for Zhaoxin soldering station and hot station — zdjęcie 1
1 / 8

Clamps for Zhaoxin soldering station and hot station

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Zhaoxin Soldering Station 936DH and similar, Zhaoxin SMD Rework Station 858D ( hot air station) and similar

Ocena
0 / 5
Polubienia
0
Pobrania
2
Wydruki
0
Wyświetlenia
35
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

About

Clamps to fix tool stations in place, probably fits other models as well.

  • Zhaoxin Soldering Station 936DH and similar
  • Zhaoxin SMD Rework Station 858D ( hot air station) and similar

Please like and publish makes and provide suggestions for improvements.

Changelog

  • 2025.09.29 - initial release

Print

  • provided gcode files are just for time and material reference
  • I suggest PETG because it is elastic enough to withstand forces used during assembly
  • 0.20mm or 0.32 mm layer height, 5 perimeters, 20% infill
  • no brim, no skirt, no supports
  • 1x clamp for soldering station
  • 2x clamp for hot air station (front and back so it does not move)

Assembly

  • print and use 2x M3 screws to fix it in place.
  • use one clamp for soldering station
  • use two clamps for hot air station so it does not move

Tagi