1 / 8
Clamps for Zhaoxin soldering station and hot station — image 1
1 / 8

Clamps for Zhaoxin soldering station and hot station

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Zhaoxin Soldering Station 936DH and similar, Zhaoxin SMD Rework Station 858D ( hot air station) and similar

Rating
0 / 5
Likes
0
Downloads
2
Makes
0
Views
35
Reviews
0

Updated at source:

Model information

Category
Electronics
License
Creative Commons — Attribution — Noncommercial — Share Alike

About

Clamps to fix tool stations in place, probably fits other models as well.

  • Zhaoxin Soldering Station 936DH and similar
  • Zhaoxin SMD Rework Station 858D ( hot air station) and similar

Please like and publish makes and provide suggestions for improvements.

Changelog

  • 2025.09.29 - initial release

Print

  • provided gcode files are just for time and material reference
  • I suggest PETG because it is elastic enough to withstand forces used during assembly
  • 0.20mm or 0.32 mm layer height, 5 perimeters, 20% infill
  • no brim, no skirt, no supports
  • 1x clamp for soldering station
  • 2x clamp for hot air station (front and back so it does not move)

Assembly

  • print and use 2x M3 screws to fix it in place.
  • use one clamp for soldering station
  • use two clamps for hot air station so it does not move

Tags