181 models
I made this bundle of brackets so you can print your own when needed. Both L-shaped brackets and corner braces, inside and outside versions. All brackets are 3mm thick, with a 6mm thick version for extra strength when that is needed. The…
Pastamatic Filament Spool Winder Modifications Changelog: 2024-02-23 Added options for huge spools and small spool with spacers. Thanks to Ch3vr0n for the idea and testing of the spool spacers Modifications to GekoPrime's winder to better…
My wife wanted to be able to customize our drawers in the kitchen. She found some ideas on Pinterest, but I decided to make a system for all of our drawers. We purchased some poplar planks (1/4" x 2 1/2" x 48") and cut them to the various…
I used these to help stabilize the long 2020 extrusions to the 2040 extrusions on my Creality Ender 5 Plus. These can be used on any frame that incorporates the 20 series extrusions. I uploaded multiple variations depending on your…
Easy to print, no supports needed.
This "thing" is a stub for the laser cut files for the Prusa i3 printer frame for use with wood, acrylic, and other thin material. Published under GPL v3, same as the Prusa i3. Grab the files from my Github repository:…
A set of simple but strong shelf brace mounts. Suggested size use: 75mm: 4" boards (3.5" finished or 89mm) 110mm: 120mm boards 125mm: 6" boards (5.25" finished or 133mm) 180mm: 8" boards (7.25" finished or 184mm) Note: Picture is of…
These are braces for the modular skadis panels meant for https://www.prusaprinters.org/prints/19442-modular-skadis-panel These will be used to piece together the above panels to form a big wide panels according to your liking. You need to…
I quickly designed some corner braces, because I have the feeling, that the frame could be a little sturdier. So far I haven't found time to do some comparative resonance measurements on the stiffness of the frame. The braces are printed…
These are braces to stiffen the frame of your BeamCase frame, or any other frame utilizing 15x15mm aluminium profiles (and m3 screws). The X-braces are made to stiffen your BeamCase frame. They are designed to work with Makerbeam XL…
These are corner braces to stiffen the frame of your BeamCase frame, or any other frame utilizing 15x15mm aluminium profiles (and m3 screws). The corner braces are made to stiffen aluminium frames and fit all BeamCase versions (SFF and…
Angled removal tool for Invisalign, Byte, Smile Direct, and other invisible braces
Update: Now for 5mm, 6mm, 8mm and 10mm These drawers dividers help to easily bring order in the drawer. No complicated cutting of drawers. Simply cut a straight board of the desired length and attach it to the matching bracket and fasten…
One of flaws with Ender 3 max is shaking of z axis, and if you want to use spool loaded from the top then it becomes a real pain to watch. This braces solve the issue. It is designed to provide Enough clearance for stock and moded cooling…
If you print at heigher speeds, the frame can start flexing a bit, potentially causing slight problems like uneven layer heights. But more important, it just looks freaking nice! For the full set, it takes 12 braces, each taking around…
Simple quick ATX PSU brace to fix on a flat deck, short one to be used for vertical installation, long to be used for flat installation.
box for dental braces or dental splint.
ARTILLERY X2 REVIEW AND IMPROVEMENTS SCREWS 8x M8 Nut 8x M8 Washer 2x M8 590mm Threaded rod Funda de cables: https://s.click.aliexpress.com/e/_DdXN71d FOLLOW ME: Youtube: dukedoks Instagram: @dukedoks Facebook: @dukedoks SOFTWARE: Fusion…
Note: Several of my designs (and remixes) for my CNC plasma rig are available here for free, and several others are exclusively for my supporters on Patreon that support for any amount, even if only a dollar a month.…
Version 1.2 (alpha) Re-install using M3x18 screws - do not use too long of screws as they can hit the belt or corner blocks. If printing in ABS you MUST use 99.5% shrinkage setting in Orca (or similar) for the filament setting. Printed…
Caja para guardar los brackets cuando vas a comer o necesitas quitartelos. Yo la he impreso en PLA con una altura de capa de 0.12mm y soporte en los laterales para los cierres. Para usarla inicialmente doblarla despacio por el centro…
originally designed for the Sovol SV03, those braces should fit any cartesian printer using aluminum extrusions (most Creality printers), the only thing that needs to be changed between different printers is the length of the threaded…
Printed in PETG @ 15% infill. ABS would probably be fine, and maybe PLA+. I might create a remix to route/retain zip ties, which I'm using to secure the pieces. Comment/Like if you need/want this!
I like the Rigidity that enclosures provide but I already have an enclosed printer. I wanted to stiffen the upper frame to dampen vibrations from the gantry motion. whipped these up in Tinkercad and they do seem to help quite a bit. I…
Simple and low profile brace to add rigidity to your lack tables . Added 3x countersunk bores. To be secured to the legs and under table surface. Screw size recommendation: I use M4 countersunk self driving screws for my Lack table. It…
# NOTES: 19/03/25 The incorrect upload of the Top Right stl has now been corrected. Thanks to those who reported the issue. 23/03/25 Added two stl's to allow for 270 deg hinges - These are untested but modified to fit…
I'm not a huge fan of the hex aesthetic and the original design used more plastic than I would have liked. Print with 3+ walls and you'll be golden.
My son has braces and need to place a rubber band between them. This is replacement for a similar tool we got from the dentist.
The complete set of Stemfie3D standard braces. get.stemfie.org x.com/stemfie3d
This is something I came up with to use up the 610mm long 3030 frame parts from my unenclosed 3.1 when I upgraded it to the 2.0 enclosure. I believe that all ratrig printers still come with these extra parts for this should work on all…
Frustrated with the lid during maintenance, I decided to make some props to hold them up while I worked in the tank. I haven't tried other tanks like the Flex or Spec range of tanks but do let me know. Printed diagonally on an Ender 3 v2,…
Remixed off of D. Harris's approach for supporting frames without a leg to stand on a surface, this remix is more modular and allows for printing a corner bracket on smaller printers. I built this to support both the edge of the table,…
The model is easy to print without support. The orientation of the model is already the right one. The only model I could find could not be printed without supports. I printed it in ABS with a 0.4mm nozzle and 0.2mm layer height. You need…
This is the latest iteration of the FIDIM leg braces. They look very similar to FIDIM 2, but I have made numerous changes. They have been thinned in some areas, and thickened in others. The uppers conform to the wearer's leg better, and…
ARTILLERY X1 IMPROVEMENTS MORE IMPROVEMENTS: https://www.thingiverse.com/dukedoks/collections/artillery-sidewinder-x1 SCREWS 8x M8 Nut 8x M8 Washer 2x M8 590mm Threaded rod Funda de cables:…
A very useful tool if you have braces with rubber bands.
Uzavíratelná krabička na rovnátka s odvětráváním pro bezpečný přenos a odkládání. Děkuji Vám za stažení. Lockable box for braces with ventilation for safe transfer and storage. Thank You for donwload.
I noticed that my V2 Neo has quite some sway in y when going fast. As a quick and dirty solution I came up with these corner braces which screw into the extrusion slots with T-nuts. You will need: 6x M4 T-nuts 6 M4x12 countersunk screws…
Replace the countersunk screw holes with a small recessed square that'll fit 3M double-sided foam tape in case you want to make adjustments in the future.
The complete set of right-angled, asymmetric Stemfie3D braces. STEMFIE news 👉 X.com/stemfie3d
Over the years, I've built several versions of temporary, cold-weather greenhouses out of PVC pipe and plastic sheeting. This year was no exception, but I did make some improvements this time around. With a piece of PVC pipe and two of…
I printed one and maybe I didn't use a good enough infill but the arms broke right away. I added some vertical support braces to the arms. Category: Props
Modified only the top right and bottom right files to accept Creality K1 & K1c Door Hinges Geared Print in Place https://www.printables.com/model/916563-creality-k1-k1c-door-hinges-geared-print-in-place it allows a full 270 degrees swing…
In case you need a new or extra tray for your Invisalign retainers - here you go :-). This is a hinged case that fits Invisalign style retainers. It is print-in-place without supports. It uses 2 6mmx3mm magnets that are press fit in the…
Description On some surface the Bambu A1 tends to move while printing. I created these corner braces to keep it in place. I designed this for #6 wood screws a that is what I had laying around, however countersunk M3 should work as well.…
You only need to print either the two big ones (recommended) or the 4 small ones. Tested Setup: Material: PLA Infill: 5% Layer Thickness: 0.2mm Printer: Prusa i3 Mk3S+
My BambuLab X1 Cabron moves so quickly I thought it would destroy the small wooden table holding it. As a result, I designed a reinforced isometric triangle to add rigidity to small tables. They are designed to use #5x1" Wood Screws , but…
Follow me at X.com/@Booleans_Things Help me keep making amazing models, for only a dollar! https://ko-fi.com/booleansandthings If you have any suggestions or requests I am more than happy to help. Drop requests and suggestions in the…
I printed mine in Overture TPU . It's a little squishy but should absorb hits and I never have to worry about breaking it again. 100% infill is probably excessive but I did it anyway. It may work in PETG but I don't know if it will be…
This is my take on the ubiquitous IKEA LACK table leg brace. When I got my LACK table in mid 2021, I tried to use some existing leg brace designs only to find that the mounting screws (in the legs) farthest away from the leg/table joint…
This is a simple dental positioning gauge I made for brackets with 0.022" slot. I printed it with resin for indirect application only for safety reasons. I have normal version and cut version for printing purposes.
Bottom Right and Top Right side braces modified to accept Creality K1 MAX Door Hinges Geared Print in Place
The complete set of Stemfie3D slotted symmetric braces. get.stemfie.org x.com/stemfie3d
The complete set of Stemfie3D slotted centered braces. get.stemfie.org x.com/stemfie3d
These are my upgrades for the Creality CR-10 S5 500mm printer. The frame braces and spool holder uses M8 threaded rods and M8 nuts. The spool holder uses two 608 ball bearings The rods must be at least 72 cm long for the two braces and 15…
I found Paver Braces on Thingiverse but after printing them out I found out they screw into the hollow part of the leg. So I whipped these up in solidworks. Print with 10 perimeters for strength, paint support enforcers on the 45 degree…
Ready straight out of the printer. It is a tight fit, so the first time assembling might require a little strength. I used PET-G for the print Let me know if there are issues
Table leg braces for for the IKEA Lack end table. Can be used on other cheap tables too.
Thanks to Jared596 for the original. These braces have helped out a lot on the shaky, cheap Lack table legs. (The little logo isn't on this upload, it's just for personal use.) This remix is based around the #12 3/4" screws recommended by…
a more simple (i think) remix : https://www.thingiverse.com/thing:3469633 of a corner brace system for 1 inch square tubing. i uploaded one with sharp corners. Category: 3D Printer Accessories
buckle for leatt c-frame knee braces, probably fits Z-frame too
Shock mounting screw brace with shock guards. This design ties into the alternative shock mounting holes for more support. It is designed to be tapped to M3x0.5mm so the screws fasten directly to it, it does not use nuts. Reuses stock…
A convenient, organized solution to store your Rubber Bands and their tools! This dome is more than big enough for all of your rubber bands. I loaded 200 in and you can see there's still plenty of room for more! Print Settings Printer:…
Parts to brace round screw in table legs ( diameter 40mm). The parts will fit wooden braces that are 10x40mm and the length will depend on the size of the tabletop and the placement of the braces. The parts fit 3 and 2.5 mm screws for the…
I wanted a set of Z-braces mostly so that I could align the Z-tower accurately. Turns out this design also makes for a very rigid structure. These braces were designed to take up as little space as possible, so that they could fit inside…
I saw this simple solution of using an affordable shoe rack for filament storage. I found the shelf to be pretty wobbly once filament was loaded and designed these stabilizing braces to give me a little more confidence it's not going to…
Angle Bracket - Corner Braces - Staffe angolari 30x30x30mm 45x45x45mm 60x60x60mm Resize to adjust dimension All our designs are free to download and use—because sharing drives innovation. Your support fuels our creativity, if you…
Remixed these support brackets for the FilppyDrive Deluxe backplate.
Wanna take your PC with you on the go, but you're worried about damaging the case? I've designed corner braces and a carrying handle for the Cooler Master Qube 540 case. Other than the printed parts themselves you need the following…
Customize in Prusa Slicer with a name, logo, etc. Lanyard A lanyard can be attached at the two slots on each side. Guide the lanyard through both and secure it with a knot. This way the lanyerds pull the box closed when worn arround the…
Update! We've added a travel kit for going to a cafe or visiting friends. It includes a shorter, double-ended hook and a case for it. The case will fit a standard forsser, a mini brush, the hook, and rubber bands that we remove before…
My SV08 came with a broken corner bracket for the upper frame. Ali is shipping me a replacement but my impatience led me to create a corner brace set. I ran these on an older printer so please forgive my layer lines, its currently my only…
I have only implemented the “ribbed” rear-right-hand side. If people would like, I will do the other variants ("plain"-{left,right}, ribbed-left) as well. The only changes to the assembly instructions for the MMU3 Cassette Buffer were to…
Generated some thicker, less flimsy, braces from the OpenSCAD files of Asraff's Modular Skadis Panels . These also have slightly wider screw holes, to ensure that a M3 screw is possible to use. I use these together with my Modular Skadis…
The complete set of cross-shaped, symmetric Stemfie3D braces. STEMFIE news 👉 X.com/stemfie3d
I decided to rebuild an original CR10 for a mate. Added the following - CanBUS - Braces - Stealthburner on linear rails - BD Sensor https://www.printables.com/model/831679-lazy-bd-sensor-adapter-for-stealthburner-voron/comments/1779948 -…
Angle Bracket Braces - Staffe angolari 03/09/2024 added REV1 Resize to adjust dimension All our designs are free to download and use—because sharing drives innovation. Your support fuels our creativity, if you download/enjoyed this file,…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, consider buying me a coffee , and check out my other models for something else you might like! ********* Why I designed my own retainer case: Most of the ones I…
upgraded with alternate shock and sway bar mounts
My fathers trailer needed a better way to hold the top braces properly, and ducttape didn't look very clean :) I decided to try designing a solution in Fusion 360 as a newbie to get into creating something that others might require as…
Ladies, Fellas, Those that know better: you ever want a bit more stiffness? just enough clearance for a glass bed and for a covered control/screen pcb. will interfere with zstop, so unless you're using BL Touch you'll need to readjust the…
The complete set of single-end slotted symmetrical #Stemfie3D braces. STEMFIE news 👉 X.com/stemfie3d
These braces are mounted with T-nuts onto the 2020 extrusion into the corners of the enclosure, and then you can place your CNC router's feets into the holes of the braces. Your CNC router will be centered, and you can even (carefully)…
My attempt at fixing the wobbling of IKEAs MICKE drawer unit. I used 3,5x30 screws on the front, and 3,5x25 for the side. I don't think the side screws were absolutely necessary, the brace will work fine without. After installing two…
Support braces to improve the stability of a table. I find that when my printer is really going my cheap IKEA table has a tendency to wobble a bit. So I designed these simple braces to make it sturdier. These are designed for the IKEA…
I managed to break the front cage of my SMT10 when a brick wall jumped out in front of me :-) This is a flat piece modeled to fit the shape of the frame on the front sides to be used as reinforcement. I like the look of the long brace…
Frame braces I made for my Tronxy P802E that got rid of most of the wiggles. I made some revisions to a few parts after making the ones that are on my printer so some will look a bit different then in the photos. The braces on the front…
Remix of https://www.printables.com/model/1241352-frame-braces-for-akai-apc-mini-mk2
Print 2 pieces and install behind each main landing gear strut and alongside fuselage as illustrated in the picture. Print the Gear Mechanism Reinforcement Bar in carbon infused filament for optimal strength. Put them all the way down to…
The complete set of fully-slotted symmetrical #Stemfie3D braces. STEMFIE news 👉 X.com/stemfie3d
These fit just by tension. You can chain as many APC Mini MK2 as you like. The feet are designed so they can stand right behind Novation Launchpads Next step is to link those to the Launchpad holers I also made.
This Lee Load-Master turret holder attaches to the large variety of Filler Spool Holder braces eg. https://www.thingiverse.com/thing:4810681 . It is styled after red_rider_95's https://www.thingiverse.com/red_rider95 Lee Load-master…
oops i forgot to upload the .step, the length issue is still around tho its like .2mm to long or something. This needs to be cut out of carbon fiber, it serves no benefits if its just 3d printed.
Same as V3 brace, but the lion print is not cut out of the brace (it is still in the STL file, so you can use it as a modifier mesh, or ignore/delete those solids). Print instructions These replace just the braces, all other parts are…
Turn your Kossel from a wobbly tower that rings like a bell into a rigid, no-nonsense, crisp-printing etc. etc. etc. thing of awesomeness with these snazzy-looking anchors for steel wire frame braces and increase either your quality or…
Update 3 (2/17/19): I found that the PSU clip was just a little too snug, so I added 1.5mm of space between the clip and the bracket. Another update (12/26/18): I've mirrored the lower PSU mount as it needed to be installed inside the leg…
A simple drawer brace that I created for repairing some broken drawers in my kitchen. In my case, the back panels to multiple drawers in my kitchen were broken off. These allowed me to screw the back panel to the side panels. You can…
i suggest printing as shown on the photo without supports
Parts List: 02 - 1515 aluminium profile (551mm lenght) 12 - M3x10mm bolts 08 - M3 HexNut 04 - M3 T-Nut 08 - M5x10 Bolt https://loja.forsetisolucoes.com.br/perfil-estrutural-em-aluminio-15x15-preto-15-1515-openbuilds-open-builds
These fit just by tension. You can chain as many APC Mini MK2 as you like. Next step is to link those to the Launchpad holers I also made.
