Prusa Enclosure Leg Braces - (2x #12 Screws)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Thanks to Jared596 for the original. These braces have helped out a lot on the shaky, cheap Lack table legs. (The…
- Rating
- 5 / 5
- Likes
- 14
- Downloads
- 73
- Makes
- 2
- Views
- 1,790
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution
Thanks to Jared596 for the original. These braces have helped out a lot on the shaky, cheap Lack table legs.
(The little logo isn't on this upload, it's just for personal use.)
This remix is based around the #12 3/4" screws recommended by Prusa for the rest of the v1 enclosure in their blog post. (The holes are 6mm in diameter). The braces use only 2 screws instead of 4 (I was low on resources).
Screw holes have a tear-drop shape for printability, there's a slight chamfer on the inside/outside of the main corner in just there's a bump, and a small triangle overhang adds bonus support to the other side of the brace.
--Cheers
Category: Replacement Parts