Alphacool Core 200 280mm Mount V2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
More rigid and refined version of the original
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 103
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Share Alike
This is a more refined version of the previous featuring more rigid spokes and leaving more space around the lower section of the reservoir. This leaves more space for thicker radiators when things are already quite tight.
Note: The RGB cable should be tucked behind the pump bracket to avoid it getting caught in the fan blades. This is the tightest I could make it.
I recommend printing it from the fan mounting holes upwards to avoid the need for supports. The edge on the “calipers” is intentionally kept sharp to create a more seamless picture. Sanding it down afterwards works better than fine-tuning chamfer that works for your printer. I just kept it as-is in the pictures.