Gridfinity 2x3 Paint Organizer - Combo Holes
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is inspired off of Shorco's design for a 22mm Paint Organizer. Expanded to 2x3 and added multi-size stepped holes.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 81
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
This design was inspired off Shorco's Paint Organizer for 22ml sample paints. New model is expanded to accommodate multiple sizes by adding stepped down holes.
Paint tubes designed for this holder:
- Liquitex 4 floz (118ml) Acrylic Paint. Lid diameter is ~38mm
- Liquitex 2.4 floz (75ml) Acrylic Paint. Lid diameter is ~38mm
- Liquitex 2 floz (59ml) Heavy Body Acrylic Paint. Lid diameter is ~29mm
- Liquitex (or generic) 22ml Sample Paint Tube. Lid diameter is ~24mm
The holder is built on the gridfinity system. If you are interested in the pegboard shelf shown in the cover photo, I have that model uploaded as well: Pegboard Straight Hook Gridfinity Shelf by BigJohnson | Download free STL model | Printables.com
Models included are both a lattice wall so it is easier to see through the wall and see labels. Alternatively, solid walls if you want something a bit stronger. Both versions have magnet or no-magnet models.
I printed this in Polymaker CF-PLA. Layer height was 0.2mm (on speed mode) for my Prusa MK4S. Infill was set at 5% and it works fine - I suggest 10%-15% to ensure it holds up to time.
Note - I did not use supports on the print despite there being very long bridges at the arches of the grid inserts. It caused no issues for me, but you could also make sure the bridge just runs at 45deg angles and it would solve any issues.