1 / 6
Sbach 300, 1000mm and 1200mm  3D printed RC plane, LW-PLA, Sbach 342 — zdjęcie 1
1 / 6

Sbach 300, 1000mm and 1200mm 3D printed RC plane, LW-PLA, Sbach 342

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

S-bach 300 plane in two sizes for printing on a 3D printer.

Ocena
1 / 5
Polubienia
30
Wydruki
0
Wyświetlenia
1981
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Standard Digital File License

We present our own custom design of a remote-controlled aircraft, inspired by the legendary Sbach 300 aerobatic plane. The model was 3D printed using LW-PLA, then painted and decorated with Red Bull stickers for aesthetic purposes only.

………………………………………………………………………………….

                                     1000mm 

General specifications:

Wingspan: 1000mm
Length: 855mm
Height: 190mm (without landing gears)
Total weight: (+/-) 613g (without landing gears)
Print weight: (+/-) 368,5g
3D Printer min. bed size: 230x*230y*170z(mm)

CG - 45 mm behind the leading edge at the wing root (measured at the fuselage). It may need to be adjusted after the first flight.

Materials needed:

LW-PLA filament: (+/-) 370g

PLA+ filament: (+/-) 20g

LW-TPU filament: (+/-) 10g

Carbon rods:
Fuselage: Fi 5mm - 570mm
Wings: Fi 10mm - 570mm
Horizontal Stabilizers: Fi 2mm - 310mm x2
Ailerons: Fi 2mm - 455mm x2
Rudder: Fi 2MM – 185mm
Elevators: Fi 2mm – 420mm
Front Landing Gears: Fi 2mm – 105mm x4

Steel rods 1.2mm (Servo-hooks)
Neodymium magnets: 10x5x3mm – 10x
Senus medium density glue(blue) + activator
Motor: D2830 750KV
ESC: MANTIS Slim ZTW-32Bit ESC 30A
Propeller: GWS 11*4,7 SF or APC 11x5,5E or APC 11*4,7 SF
Battery: Tattu R-Line 750mAh 4S 14.8V
Servo motors: EMAX ES9052MD 5.5g metal – 4x
Controller: FLYSKY FS-i6x 2.4G 6/10CH AFHDS 2A + receiver IA10B

………………………………………………………………………………….

                                      1200mm 

General specifications:

Wingspan: 1200mm
Length: 1100mm
Height: 230mm (without landing gears)
Total weight: (+/-) 950g (without landing gears)
3D Printer min. bed size: 230x*230y*240z(mm)

CG - 54 mm behind the leading edge at the wing root (measured at the fuselage). It may need to be adjusted after the first flight.

Materials needed:

LW-PLA filament, PLA+ filament, LW-TPU filament

Carbon rods:
Fuselage: Fi 6mm - 700mm
Wings: Fi 10mm - 680mm
Horizontal Stabilizers: Fi 3.5mm - 370mm x2
Ailerons: Fi 2.5mm - 540mm x2
Rudder: Fi 2.5 – 220mm
Elevators: Fi 2.5mm – 500mm
Front Landing Gears: Fi 2.5mm – 120mm x4


Steel rods 1.2mm (Servo-hooks)
Neodymium magnets: 10x5x3mm – 10x
Senus medium density glue(blue) + activator
Motor: Volantex 4023 1050kv or Racestar BA4023 1050kv
ESC: ZTW Beatles G2 ESC 50A
Propeller: 13x4 or 12x4.5 or 12x6
Battery: Lipo 3s 2200mah 11.1V
Servo motors: EMAX ES9052MD 5.5g metal – 4x
Controller: FLYSKY FS-i6x 2.4G 6/10CH AFHDS 2A + receiver IA10B

………………………………………………………………………………….

Inside .zip:
STL files
Manual with print settings
.3MF files

In our profile you will find test files of our projects.

Presentation and assembly shown in the video on Youtube:

 

The plane was designed to fly without landing gear.
The plane has landing gear but it has not been tested (lack of space).
Please take this into account before purchasing the project.

If you have any questions or problems, please contact us: [email protected]

https://www.instagram.com/binio3d/

https://www.facebook.com/profile.php?id=100090110918979&locale=pl_PL

⚠ This project is not sponsored by or affiliated with Red Bull. The use of Red Bull branding is purely decorative and non-commercial.

Tagi