1 / 8
Benriner Mandoline No. 95 Super Slicer Combined Blade Guard and Julienne Triple Blade Holder — zdjęcie 1
1 / 8

Benriner Mandoline No. 95 Super Slicer Combined Blade Guard and Julienne Triple Blade Holder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Combines, in a single unit, both a guard for the main blade and a holder to store the three julienne blades.

Ocena
5 / 5
Polubienia
6
Pobrania
78
Wydruki
1
Wyświetlenia
325
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This unit secures to the mandoline’s main cutting blade using two rare earth magnets. The magnets can be attached using epoxy (or another suitable adhesive). The magnet diameter is 0.25” (6.35mm) and can be changed using the FreeCAD design file.

To remove the blades, the knurled slot key is slid sideways far enough to clear the blade storage socket (or the key can be removed entirely if desired).

All the print settings can be found in the 3mf files but, in summary:

  • Main body: Filament = PLA, Perimeters = 4, Fill density 15%, Fill pattern Gyroid, Support Everywhere, Overhang threshold 5, Style Organic
  • Slot key: Filament = PLA, Perimeters = 5, Fill density 15%, Fill pattern Gyroid, Support Everywhere, Overhang threshold 10, Style Organic

 

Tagi