1 / 8
Benriner Mandoline No. 95 Super Slicer Combined Blade Guard and Julienne Triple Blade Holder — image 1
1 / 8

Benriner Mandoline No. 95 Super Slicer Combined Blade Guard and Julienne Triple Blade Holder

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Combines, in a single unit, both a guard for the main blade and a holder to store the three julienne blades.

Rating
5 / 5
Likes
6
Downloads
78
Makes
1
Views
325
Reviews
1

Updated at source:

Model information

Category
Kitchen
License
Creative Commons — Attribution — Noncommercial — Share Alike

This unit secures to the mandoline’s main cutting blade using two rare earth magnets. The magnets can be attached using epoxy (or another suitable adhesive). The magnet diameter is 0.25” (6.35mm) and can be changed using the FreeCAD design file.

To remove the blades, the knurled slot key is slid sideways far enough to clear the blade storage socket (or the key can be removed entirely if desired).

All the print settings can be found in the 3mf files but, in summary:

  • Main body: Filament = PLA, Perimeters = 4, Fill density 15%, Fill pattern Gyroid, Support Everywhere, Overhang threshold 5, Style Organic
  • Slot key: Filament = PLA, Perimeters = 5, Fill density 15%, Fill pattern Gyroid, Support Everywhere, Overhang threshold 10, Style Organic

 

Tags