45x45 to 30.5x30.5mm adapter plate
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
45x45 to 30.5x30.5mm adapter plate for F/Q450 quad rev1 (fillet rounded) outer screw dia.- M2.5 inner screw dia.- M4
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 54
- Wydruki
- 0
- Wyświetlenia
- 156
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This is an adapter plate for F450 or Q450 quadcopter frame (DJI/similar clone frames). Some 450mm frames have 4 screw holes on the top plate. If you wish to use a Betaflight based FC (or any other FC with 30.5 x 30.5 mm mounting holes) then you can use this adapter plate.
This part adapts a 45 x 45 mm mounting holes (M2.5 screws) to the standard 30.5 x 30.5 mm mounting (M4 dia.).
This part has been printed and successfully used in my college's aviation club first quadcopter project. The material used was engineering material / nylon printed off a 3rd party 3D printing service. You can use self-threading M2.5 screws for a smoother experience. But I used regular M2.5 Allen bolts and it took some elbow grease and a lot of time, but it screwed in just fine.
This part is field tested and has survived a lot of crashes. It holds up really well!