45x45 to 30.5x30.5mm adapter plate
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
45x45 to 30.5x30.5mm adapter plate for F/Q450 quad rev1 (fillet rounded) outer screw dia.- M2.5 inner screw dia.- M4
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 57
- Makes
- 0
- Views
- 164
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This is an adapter plate for F450 or Q450 quadcopter frame (DJI/similar clone frames). Some 450mm frames have 4 screw holes on the top plate. If you wish to use a Betaflight based FC (or any other FC with 30.5 x 30.5 mm mounting holes) then you can use this adapter plate.
This part adapts a 45 x 45 mm mounting holes (M2.5 screws) to the standard 30.5 x 30.5 mm mounting (M4 dia.).
This part has been printed and successfully used in my college's aviation club first quadcopter project. The material used was engineering material / nylon printed off a 3rd party 3D printing service. You can use self-threading M2.5 screws for a smoother experience. But I used regular M2.5 Allen bolts and it took some elbow grease and a lot of time, but it screwed in just fine.
This part is field tested and has survived a lot of crashes. It holds up really well!
