Faketec Slim Case w/OLED
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A slim case for faketec meshtastic board and OLED.
- Ocena
- 0 / 5
- Polubienia
- 20
- Pobrania
- 73
- Wydruki
- 0
- Wyświetlenia
- 573
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Meshtastic Logo Version Now Available!
There are many faketec cases, but none that gets easily into the pocket and looks fine.
This is a case that's built for Faketec Boards(probably all of them). There should be SMD buttons soldered on board for the buttons to be operational. The case has space for a 2000 mAh Li-Ion battery(34x48x10mm) , an SMD type active buzzer, and sensor for telemetry(AHT11+BMP280 combo in my case). If a buzzer and sensor is not used, a battery sized up to 45x50x10mm can be used.
The antenna used is 14mm at the base, so there's no limit on antenna size practically.
Also added holes for attaching a lanyard and a slit in the side for easier opening.