Faketec Slim Case w/OLED
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A slim case for faketec meshtastic board and OLED.
- Rating
- 0 / 5
- Likes
- 20
- Downloads
- 73
- Makes
- 0
- Views
- 573
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Meshtastic Logo Version Now Available!
There are many faketec cases, but none that gets easily into the pocket and looks fine.
This is a case that's built for Faketec Boards(probably all of them). There should be SMD buttons soldered on board for the buttons to be operational. The case has space for a 2000 mAh Li-Ion battery(34x48x10mm) , an SMD type active buzzer, and sensor for telemetry(AHT11+BMP280 combo in my case). If a buzzer and sensor is not used, a battery sized up to 45x50x10mm can be used.
The antenna used is 14mm at the base, so there's no limit on antenna size practically.
Also added holes for attaching a lanyard and a slit in the side for easier opening.